SCS Meet: Dyno Day @ West Coast Viper in Temecula, Saturday 10/16/04

[Dark Helmet]

Hi,

Steven is setting up a club dyno day for us up at West Coast Viper in Temecula.

Date: Saturday, October 16th
Time: TBA
Cost: $35 for 2 pulls with A/F readouts
Dyno: DynoJet (SAE corrected)
Address: 43124 Rancho Way # C Temecula, CA
Phone: (951) 676-1204

Who's Going:
1. Shaun (sstrayer)
2. Steven (9t3svt)
3. Rob (wickdv8)
4. Mark (kingnothing531)
5. Albert (finerlogic)
6. Ken (ken04cobra)
7. Wayne (lasrred99gt)
8. Eric (outafaze)
9. Dan (danthemustangman)
10. Greg (fox 5.0)
11. Justin (jggilmore12)
12. Jim (jim)

Hope to see everyone make this turnout

[El Presidente]

After the Dyno's are done I'll be hosting a club BBQ at my house, everyone is invited. I'll supply the drinks and food I just need a number so I know how much to get. I have a pool table so we could have a tournament if anyone is interested. If you need to crash at my place you're more than welcome, just bring a sleeping bag :shaun: :beer:

[WICKDV8]

I am SO there dudes...

[Ken04Cobra]

The Wife and I will be there....

If you want us to bring anything just let me know.

Ken

[LasrRed99GT]

I'm goin

[outafaze]

If I get the new fuel pump in, I'm there. If not I'll stop by on the way to dropping the rug rats off at my rent's place that weekend. Are rug rats welcom at the BBQ, no hard feelings if they're not?

[El Presidente]

Sure, bring the kids, no problem :mario:

[Dark Helmet]

If I get the new fuel pump in, I'm there. If not I'll stop by on the way to dropping the rug rats off at my rent's place that weekend. Are rug rats welcom at the BBQ, no hard feelings if they're not?

Eric, we can setup another daycare if you want to do some more auto-crossing :smile

[uh60lchief]

I'm there, i don't think I'll dyno though. I'm po.

[Fox 5.0]

ooo ill definately be requesting saturday off next week... i would really like to know how much power my car doesnt have!!

[SLP 02 GT]

crap! i cant go i have a graphic design class at cal state san marcos all day that day

[DantheMustangMan]

if i make it to the dyno ill be there for the bbq, im not driving all the way down to turn around, ill chill for a little while, hopefully the dyno is in the afternoon cause i get out of school at midnight and i dont get up early

[Fox 5.0]

Ya... quick question... but when is the dyno starting??? i got work at 6pm on saturday so i hope i can make it back by then??? make it early in the morning!!!

[Dark Helmet]

Ya... quick question... but when is the dyno starting??? i got work at 6pm on saturday so i hope i can make it back by then??? make it early in the morning!!!
Greg, we havn't set a time up yet, but it will be sometime in the day and you can go in the beginning. I don't think making it to work would be a problem.

Shaun

[Fox 5.0]

awesome... ya for me, earlier the better.

[El Presidente]

After speaking with John today (from the Dyno place) he said we could come anytime between 8am and noon but we have to be done at 3pm. I think we should roll up there no later than like 1030 :riight: He also said he doesn't care how many pulls we get he was like "No problem, we could do 3 or 4 per car, I don't care" How cool is that? So let's decide on a time and I'll set it up with him when he gets back from NY :smile

[Dark Helmet]

I say meet there at 10am.

[JGGilly12]

I will be there!!! I want to get some numbers on the stock Mach as a base and then build from there!!! :smile Hopefully i can get my dad to go and bring the green gt and get some numbers on that too b/c i have never dynoed it and am curious on numbers.

[Ken04Cobra]

I think we now have a contest between Justin and Dan's avatar on which I like the best.

Please E-mail me more "samples" so that I may make a more comprehensive decision.

Thanks,

Ken
kenneth7000@yahoo.com

[Dark Helmet]

I think we now have a contest between Justin and Dan's avatar on which I like the best.

Please E-mail me more "samples" so that I may make a more comprehensive decision.

Thanks,

Ken
kenneth7000@yahoo.com

MercedesTerrell.com - my choice :iluvu:

[Heathdude]

I'd love to, have to see when I can cut loose after soccer. Had a dyno done in Vegas, but I think it was a touch off. 285.5 HP / 671 TQ.

I should haul freight in my spare time.

[Dark Helmet]

671 rwtq, damn that's some good torque you got there :)

[Fox 5.0]

If we can be there at 8... why not show up at 8... i mean if every car can get 3 or 4 pulls... why not right??

[El Presidente]

Because it's a Saturday, sorry dude no need to get up that early, besides you all have a 45 min drive at least. Good luck talking everyone else into waking up at 645am on a Sat. Besides, you don't have to be at work until 6pm thats a long way away from 1030am. If your that worried we can have you Dyno first. Not to be a dick but 8am is just to early if I'm not getting paid :hands:

[outafaze]

10:00 or so sounds good to me since I'll be up late installing a fuel pump on Friday. Hell, I might even put on the C/B if there's enough room when the tank is out.

[Dark Helmet]

10:00 or so sounds good to me since I'll be up late installing a fuel pump on Friday. Hell, I might even put on the C/B if there's enough room when the tank is out.
You pick up a walbro Eric?

[Fox 5.0]

I dont care... i just figured everyone would want to make sure they get a turn on the dyno incase things do take longer than expected... 10am is fine with me tho, if we have to be done by 3pm anyways, work is not an issue...

[outafaze]

You pick up a walbro Eric?
Yeah, I found one on Ebay for $103 shipped. Unfortunately my dumb self didn't read the payment section carefully so I had to mail the payment. I was hoping to use paypal or a credit card to install the pump this weekend. Oh well, the pump should get here next Wednesday and install Friday night if all goes well. Are you gonna go to the WH hangout tonight?

[Dark Helmet]

Are you gonna go to the WH hangout tonight?
Yea I should be there tonight.

Shaun

[WICKDV8]

10 sounds good to me.. Im there!

[Heathdude]

Sorry folks, no go. Soccer at 10:00. Have fun!!!!!

[El Presidente]

The meeting spot for this event will be at the Promenade Mall in the JcPenny parking lot at 10:00am. Members coming from Oceanside and lower take the 15N towards Temecula, exit at Winchester and go Right then Right at the second light (there's a 76 gas station there) If you're coming from Riverside, take the 15S to Winchester, go Left then Right at the 76 station. We'll head over to the Dyno spot at 10:30, no later. If your late call me at (858) 414-8818. I'm sure all the Oside and below peeps will meet somewhere south of Temecula, Shaun? Wayne? Rob? Ryan?

[WICKDV8]

i'm just planning on being at the promenade at 10, but i can meet up somewhere else if desired...

[Fox 5.0]

so are the people from SD meeting up somewhere to cruise to temecula or what?

[KingNothing531]

Hopefully GTR performance can get me in for my procharger instal before I go...otherwise i'll just be dynoing my pretty much stock V6 and cry as i look at the results. See you guys there.
-Mark

[JGGilly12]

Ill be coming from South San Diego area if anyone wants to meet with me. Shaun Ryan Wayne and whoever else from down south we need to pick a place and time to meet up.

[WICKDV8]

Ill be coming from South San Diego area if anyone wants to meet with me. Shaun Ryan Wayne and whoever else from down south we need to pick a place and time to meet up.

You Greg and I are all down here in southland, we should meet up and then rondesvous with shaun and Wayne somewhere further up north... Just an Idea

--Rob

[Fox 5.0]

word... well if we all take the 15N to temecula... why not just meet at like the fashion valley mall off fryers... thats sorta by the freeway???

[LasrRed99GT]

Shaun and I will meet up with you at the gas station off the 15 and 76/pala rd exit.

[DantheMustangMan]

if im not at the promenade mall by 1030 leave without me, i will meet you guys at the dyno shop if im late, cause i got school friday night, but im going to try and get up early, its tough so we shall see

[JGGilly12]

That sounds good. We will meet at Fashion Valley Mall out in front of the P.F. Chang's. Lets say we will be there around 8:45-9:00am. From there we can meet up with Wayne and Shaun at the gas station specified in Waynes previous post. Then off to Temecula :hands:

[Ken04Cobra]

I will be at the gas station off the 15 and 76/pala rd exit. But, in a different section then Wayne and Shaun. Like 2 parking spots over....Don't want this to turn into a Love triangle or anything...

Ken

[Fox 5.0]

awesome... ill be ready at the fashion valley mall at 8:45am, look for a red fox body!!

[uh60lchief]

I got roped into helping this hottie move, so I might not be able top make the dyno, but I'd like to go to the BBQ, can you post or pm me the directions? :shaun:

[Dark Helmet]

I will have to arrive a bit late around 11 or so, the poochies are graduating from class this week. :bigsmile: